Back to Top

1
Hi, Guest!

  LOKASI :  Kabupaten Semarang

BAGIKAN :   

Bagikan :
Kontak Kami  
Multi Sarana Industrindo sebagai agent dan distributor berbagai kebutuhan perusahaan anda dengan bermacam-macam merk dan product seperti + GF+ SI

Vertical Milling Machining Centres VMC1580

Update Terakhir
:
16 / 03 / 2024
Min. Pembelian
:
1 Unit

Harga

CALL
Bagikan
:
Multi Sarana Industrindo sebagai agent dan distributor berbagai kebutuhan perusahaan anda dengan bermacam-macam merk dan product

Detail Vertical Milling Machining Centres VMC1580

Multi Sarana Industrindo menjual berbagai macam kebutuhan industri, seperti : metal conductivity tester, oil flow meter/oil control valve, paper thickness gauge, pressure gauge, alat ukur minyak, alat ukur makanan, alat ukur kimia, alat ukur metalurgi, alat ukur tenaga listrik, radiation detector, detektor radiasi, dosimeter alarm radiasi pribadi, alat detektor radiasi nuklir, Mesin Milling



Main Features:

1. The X, Y, Z three directions of feed use high-precision and high-strength ball screws, with high feed speed; the drive motor is directly connected to the screw through an elastic coupling, and the feed servo motor directly transmits the power to the high 2. Precision ball screw, no backlash, to ensure the positioning accuracy of the machine tool.
3. It adopts high-speed, high-precision, and high-rigidity spindle unit from a well-known Taiwanese brand, with strong axial and radial load-bearing capacity, and a speed of 6000rpm.
4. The spindle adopts a central air blowing structure. After the spindle is released, the central high-pressure gas is used to clean the inner cone of the spindle to ensure the accuracy of tool clamping.
5. X, Y, and Z directions guide rails and lead screws are all sealed and protected to ensure the cleanliness of the lead screws and guide rails and ensure the transmission and movement accuracy of the machine tool.
6. The outer protection of the machine tool adopts a semi-protective structure design, which is convenient to use.
7. Adopting Taiwan’s high-quality 24 disc tool magazines, with accurate tool change, short time and high efficiency. It has been tested by millions of times and meets the reliability requirements; with a damping structure, it can reduce the impact during movement and ensure the tool The service life of the library; pneumatic drive, tool change in the shortest path.


Specification:

1. Worktable size: 1600X800mm
2. X、Y、Z travel axis: 1500X800X700mm
3. Booster cylinder: With spindle
4. T-siot size: 5-22X135
5. X、Y、Z screw model: 5016/5016/5016
6. Worktable load: 1500KG
7. X、Y、Z feeding speed: 24000、24000、18000mm/min
8. Positioning accuracy: ±0.01mm
9. Repeat positioning: ±0.008mm
10. Spindle motor: 11/15KW
11. Distance from spindle center to column surface: 855mm
12. Distance from spindle nose to worktable: BT40:190-890/BT50:155-855mm
13. Net/Gross weight: 12/13T


Tersedia juga model lain.
Untuk Info Harga Silahkan Hubungi 0858-7630-0414 (Fast respon)
Tampilkan Lebih Banyak