Detail Guided Radar E+ H Levelflex M FMP41C
Continuous Level Transmitter for
- Level Measurement in Liquids
- Interface Measurement in Liquids
Measurement independent of product properties as:
- dielectric constant,
Measurement is also possible in the event of foam or if the surface is very turbulent.
Simple, menu-guided onsite operation with four-line plain text display.
Easy remote operation, diagnosis and measuring point documentation with the free operating program supplied.
Optional remote display and operation.
Onsite envelope curve on the display for easy diagnosis.
Electronics can be replaced without opening the tank.
Application in safety related systems ( overspill protection) with requirements for functional safety up to SIL 2 in accordance with IEC 61508/ IEC 61511-1.
- Europe: ATEX, EHEDG, steam boiler EN 12952-11/ EN 12953-9.
- North America: FM, CSA.
Field of application
The Levelflex M is used for continuous level measurement of liquids.
FMP41C for corrosive liquids and hygienic requirements
Highest chemical resistance.
Rod probes up to 4 m ( 157" ) , rope probes up to 30 m ( 1181" )
with rod probe also for food processing and pharmaceuticals.
All wetted components: PTFE, FDA-listed, gap-free.
The following interfaces are available for system integration:
HART ( standard) with 4 to 20 mA analog,
Continuous measurement of interfaces between two
liquids with very different dielectric constants, such as in
the case of oil and water for example.
Measurement independent of density, conductivity and temperature.
Electronics version for the simultaneous measurement of the level of interfaces and the total level in liquids. The HART with 4 to 20 mA analog protocol is available for system integration.
Special version for the measurement of the level of interfaces at a constant total level. The PROFIBUS PA and FOUNDATION Fieldbus protocols are available for system integration.
Tampilkan Lebih Banyak