Back to Top

1
Hi, Guest!

  LOKASI :  Kabupaten Semarang

BAGIKAN :   

Bagikan :
Kontak Kami  
Multi Sarana Industrindo sebagai agent dan distributor berbagai kebutuhan perusahaan anda dengan bermacam-macam merk dan product seperti + GF+ SI

Fiber CNC Sheet Metal Cutting Machine 1500W

Update Terakhir
:
12 / 12 / 2023
Min. Pembelian
:
1 Unit

Harga

CALL
Bagikan
:
Multi Sarana Industrindo sebagai agent dan distributor berbagai kebutuhan perusahaan anda dengan bermacam-macam merk dan product

Detail Fiber CNC Sheet Metal Cutting Machine 1500W

Multi Sarana Industrindo menjual berbagai macam kebutuhan industri, seperti : metal conductivity tester, oil flow meter/oil control valve, paper thickness gauge, pressure gauge, alat ukur minyak, alat ukur makanan, alat ukur kimia, alat ukur metalurgi, alat ukur tenaga listrik, radiation detector, detektor radiasi, dosimeter alarm radiasi pribadi, alat detektor radiasi nuklir, Mesin Potong


Untuk Info Harga atau Lainnya Silahkan chat/WA ke no 0858-7630-0414 (Fast respon)


Description:

The laser beam hits the surface of the workpiece so that the workpiece reaches the melting point or boiling point, while the high-pressure gas that is aligned with the beam will blow away the melt or vaporized metal.With the movement of the beam and the relative position of the workpiece, the material is finally cut and slit so as to achieve the purpose of cutting.Cnc Sheet Metal Cutting Machine is used to replace the traditional mechanical knife with invisible beams. It featured high precision, fast cutting, not limited to cutting pattern limitation, automatic typesetting saving material, smooth incision, low processing cost.


Specifically:

Metal Sheet Cutting Laser Machine speed is fast: The cutting speed of laser cutting equipment is more than 10 times that of CNC punching machine tools, and the efficiency advantage is directly reflected in the economic advantage of laser cutting. Laser cutting is of high quality: As a traditional metal cutting method, CNC punch press has a relatively large restriction, that is, the loss of material is relatively large. At the same time, from the perspective of cutting effect, it is not as good as laser cutting and usually requires secondary processing. However, There is still a lack of accuracy. The reason why laser cutting has very little damage to materials is mainly because it is a non-contact processing technology, without secondary processing, and its accuracy is better than stamping technology.


Advantages:

1. Pulse method: Print the laser beam on a plastic plate, move the laser head from top to bottom, check all holes, focus on the smallest diameter.

2. Inclined plate method: Use an inclined plate below the vertical axis, move horizontally, and find the laser beam at the minimum focus.

3. Find the blue spark: Remove the nozzle part, blowing part, stainless steel plate on the machine, move the laser head up from the top, until you find the blue spark as the focus.


Tersedia juga model lain.
Silahkan chat/WA ke no 0858-7630-0414 (Fast respon)
Tampilkan Lebih Banyak