Back to Top

Hi, Guest!

  LOKASI :  Kabupaten Semarang


Bagikan :
Kontak Kami  
Multi Sarana Industrindo sebagai agent dan distributor berbagai kebutuhan perusahaan anda dengan bermacam-macam merk dan product seperti + GF+ SI
  • Mesin Industri
  • CO2 Laser Engraving Machine System for Wood Acrylic Plastic

CO2 Laser Engraving Machine System for Wood Acrylic Plastic

Update Terakhir
01 / 12 / 2023
Min. Pembelian
1 Unit


Multi Sarana Industrindo sebagai agent dan distributor berbagai kebutuhan perusahaan anda dengan bermacam-macam merk dan product

Detail CO2 Laser Engraving Machine System For Wood Acrylic Plastic

Multi Sarana Industrindo menjual berbagai macam kebutuhan industri, seperti : metal conductivity tester, oil flow meter/oil control valve, paper thickness gauge, pressure gauge, alat ukur minyak, alat ukur makanan, alat ukur kimia, alat ukur metalurgi, alat ukur tenaga listrik, radiation detector, detektor radiasi, dosimeter alarm radiasi pribadi, alat detektor radiasi nuklir, Mesin Laser Cutting

Untuk Info Harga atau Lainnya Silahkan chat/WA ke no 0858-7630-0414 (Fast respon)


A Laser Engraving Machine System is composed of laser cutter frame, laser cutting head, laser lens, laser mirror, laser generator, laser power supply, water chiller, control panel and CNC (Computer Numerical Controlled) system.

CO₂ laser cutting with oxygen or nitrogen?

In co2 laser engraving machine, co2 laser engraving machine is possible with both oxygen or nitrogen. The difference is that oxygen burns the material and nitrogen melts the material. Thicker materials can be laser cut when using oxygen. The disadvantage of cutting with oxygen is that an oxide layer forms on the cutting surface. This can break off, which is not desirable if the products are preserved without pre-treatment (blasting). Nitrogen laser cutting creates a clean cutting surface without oxide film. On the other hand, when cutting with nitrogen, cutting surfaces are sometimes less smooth and slight burring may occur. The amount of spatter on the inside of the product is also greater than when cutting with oxygen.


1. 3mm Cold-rolled steel welded machine bed, strong and running stable, laser cutting area: 1300*900mm
2. Aluminium blade table: to process hard materials like acrylic, wood and so on.
3. Fireproof window,more security.4.CO2 Glass sealed laser tube China famous brand ( YONGLI, RECI, EFR), good beam mode stability, service time over 8500~10000 working hours.
5. Laser Power 40W~180W, good quality and stable output to prolong the laser tube service time.
6. Singapore imported lens and mirrors. High transmittance, good focusing, reflecting effect.
7. Ruida or Leetro Controller USB interface, support online/offline working, English language system, adjustable cutting speed and power.
8. Tiwan Linear square guide rails, higher precision.
9. Laser engraving and cutting or Lasercut software, user’s manual.
10. Tool box: A set of wrenches, lens cleaning paper, a pack of screws, a spare limit switch, a lens removal tool, manual, CD, U disk, a focal length of stick.
11. Open style, the front and back of the machine is open which is possible for longer material, breakthrough the limit of the workpiece length.

How does a Co2 Laser Work?

Let’s dig into the nitty-gritty. There is a lot of magic (and science!) involved in this tool that will give your business the capability to transform any object into a prized possession.
In a 100w co2 laser engraver, light is produced when electricity runs through a gas-filled tube with mirrors at both ends. One mirror is fully reflective while the other one lets some light come through. These mirrors guide the laser beam into the material that is to be cut. The gas is typically a mixture of carbon dioxide, nitrogen, hydrogen, and helium.
Any light produced by Co2 lasers is extremely powerful compared to normal light. This is because of the mirrors that bookend the tube of gases. These mirrors reflect most of the light traveling through the tube and cause the light waves to build in intensity. The light only passes through the partially reflective mirror when it becomes bright enough.
Since the light from a laser is infrared, it is invisible to the human eye. It also has a very long wavelength. It can cut a variety of materials, including cloth, wood, metal, glass, and paper. The intense heat from this light vaporizes the material that is going to be cut, leaving an accurate, smooth finish.
Depending on the look you are going for on your material and what material you are cutting or engraving, the speed and power settings can be decreased and increased. Testing your material beforehand is a good practice and will get you closer to perfect results, every time.


High speed laser engraving cutting machine for nonmetals is widely applied for engraving and cutting various non-metal materials, such as: acrylic, wood, plywood, mdf, double-layer sheet, cloth, leather, foam, glass, stone, etc.
It is popular in the industries of advertising signs, arts and crafts, architectural models, wine bottle customizing, toys, cloth, shoes, bags, etc.

Tersedia juga model lain.
Silahkan chat/WA ke no 0858-7630-0414 (Fast respon)
Tampilkan Lebih Banyak