Back to Top

1
Hi, Guest!

  LOKASI :  Kabupaten Semarang

BAGIKAN :   

Bagikan :
Kontak Kami  
Multi Sarana Industrindo sebagai agent dan distributor berbagai kebutuhan perusahaan anda dengan bermacam-macam merk dan product seperti + GF+ SI
  • Camozzi Cylinder 60M2L063A0250

Camozzi Cylinder 60M2L063A0250

Update Terakhir
:
16 / 04 / 2020
Min. Pembelian
:
1 Unit

Harga

CALL
Bagikan
:
Multi Sarana Industrindo sebagai agent dan distributor berbagai kebutuhan perusahaan anda dengan bermacam-macam merk dan product

Detail Camozzi Cylinder 60M2L063A0250

Camozzi series 60 cylinders have been designed to comply with the dimensions laid down in the ISO 15552 standards. A permanent magnet, mounted on the piston, enables information to be received regarding the piston position by means of proximity switches positioned along the cylinder tube. This Camozzi cylinders series is normally equipped with adjustable end-stroke cushioning. Moreover these cylinders are equipped with a mechanical cushioning in order to reduce the impact of the piston as it reaches the end of the stroke. Type of construction with tie-rods Operation double-acting, single-acting, tandem. Low friction version: double-acting only. Materials standard: AL end-blocks and piston, rolled stainless steel AISI 420B rod, anodized AL tube, zinc-plated steel tie-rods and tie-rod nuts, PU seals; low friction: standard materials with NBR piston seals and NBR rod seal ( FKM rod seal on request) low temperature: standard materials with chrome plated stainless steel AISI 420B rod, brass rod scraper ring, stainless steel AISI 303 nuts, stainless steel AISI 420B tie-rods, PU piston seals and NBR rod seal Type of mounting with tie-rods, with front / rear flange, foot mounting, with centre / front / rear / swivel trunnion Strokes min - max 10 ÷ 2500 mm Operating temperature standard and low friction: 0° C ÷ 80° C ( with dry air - 20° C) low temperature ( -40° C version) : -40° C ÷ 60° C ( with dry air -40° C) low temperature ( -50° C version) : -50° C ÷ 60° C ( with dry air -50° C) Operating pressure 1 ÷ 10 bar ( standard and low temperature) ; 0, 1 ÷ 10 bar ( low friction) Speed 10 ÷ 1000 mm/ sec, no load ( standard and low temperature) ; 5 ÷ 1000 mm/ sec, no load ( low friction) Fluid filtered air, without lubrication. For standard versions only: if lubricated air is used, it is recommended to use oil ISOVG32. Once applied the lubrication should never be interrupted.
cylinder liner
Tampilkan Lebih Banyak